Leapers, Inc. - Hunting/Shooting, Sporting Goods and Security Gear

UTG 3" Sub-compact ITA Red/Green Dot Sight with Integral QD Picatinny Mount
SCP-DS3028W

UTG 6.4" ITA Red/Green Dot Sight with Integral QD Mount & Flip-open Lens Caps
SCP-DS3068W

UTG 3X Magnifier with Innovative Flip-to-side Quick Detach Picatinny Mount
SCP-MF3WQS

UTG 4.2" ITA Red/Green Dot Sight with Riser Adaptor, QD Mount & Flip-open Lens Caps
SCP-DS3840W

UTG 4" Compact ITA Red/Green Circle Dot Sight with Integral QD Picatinny Mount
SCP-RG40CDQ

UTG 4" Compact ITA Red/Green Target Dot Sight with Integral QD Picatinny Mount
SCP-RG40SDQ

UTG New Gen 4" Red/Green Dot Sight with Integral Picatinny Mounting Deck
SCP-RD40RGW-A

CR1620 Battery 3V Lithium Battery
BAT-CR1620

Magnification:	1.00X
Tube Diameter:	30mm
Objective Diameter:	26mm
Field of View @ 100 yards:	70
Eye Relief:	Flexible
Exit Pupil:	22mm
Click Value @100 yards:	1/2"
Length:	100mm
Weight:	5.6 oz
Parallax Setting:	Infinity
Batteries:	CR1620 3V

A:	99.8mm
B:	32.1mm
C:	N/A
D:	N/A
E:	57.4mm
F:	10.7mm
G:	34mm
H:	33.4mm
I:	N/A

	Target Dot reticle consists of a single floating dot in the center as the aiming point with the least visual distraction. It is commonly used for quick aiming applications with lower demand for pin-point accuracy. The shooter aims by pointing the dot on the target. Target Dot may be permanently etched on glass or formed by light reflection. For an etched dot, you can use the dot for aiming with or without illumination and the scope may come with variable magnifications. The dot size can be controlled to as small as 2MOA with sharp and clear edges. For a reflex dot, the sight usually does not have magnification and there is an unlimited eye relief. The reflex dot is a reflected image of the light source with common characteristics from any light reflection, including possibly slight flare and fuzziness of the dot. The typical dot size is 5MOA.
	Circle Dot reticle includes a floating circle and a dot in the center. The circle draws the eye to the target and the dot indicates the exact aiming point. Circle Dot reticle is ideal for shotgun shooting, fly hunting as well as tactical applications which require quick target acquisition. The circle may be broken into four quadrants for convenient alignment. Circle Dot may be permanently etched on glass or formed by light reflection. For an etched circle dot, you can use the reticle for aiming with or without illumination and the scope may come with variable magnifications. The dot size can be controlled to as small as 2MOA with sharp and clear edges. For a reflex Circle Dot, the sight usually does not have magnification and there is an unlimited eye relief. The reflex Circle Dot is a reflected image of the light source with common characteristics from any light reflection, including possibly slight flare and fuzziness of the dot. The typical center dot size is 5MOA.
	Duplex reticle consists of thin crosshairs in the center and four posts extending to the reticle perimeter from the edges of the thin crosshairs. The thicker posts stand out against the background, while the thin crosshairs are for precise aiming and better view of the area of interest on the target. The thin crosshairs may also be used for range estimating. Duplex reticle could be etched on glass or etched from metal thin film. It may also be illuminated. Comparing to Mil-dot reticle, Duplex reticle is more traditional and usually used in hunting applications.
	Pro 5-step reticle is designed for crossbows, but can also be used in other applications such as rifles, airguns, etc. The reticle consists of five horizontal lines and a vertical line. And there is a thin crosshair in the center. If used on crossbows, the horizontal lines are for aiming at 10, 20, 30, 40 and 50-yard distances. The lines are calibrated for 300fps crossbows. The user needs to find out the exact yardage of each line during zeroing process. Pro 5-step reticle could be etched on glass or etched from metal thin film. It may also be illuminated.

Optics Warranty:

Lifetime warranty* for AccuShot Series, UTG Series, 5th Gen Series and Golden Image Series scopes.
(*2 year warranty for Dot Scopes/Sights.)

Warranty against material or workmanship defects applies based on the following conditions -

Scope was purchased new. Evidence of purchase is required for warranty service.

Scope was not disassembled, parts/screws not removed or loosened, and the scope was not tampered with in any way. Any evidence of such interference will void the warranty.

Scope has not been abused, maliciously damaged or treated in a manner not in keeping with the purpose it was designed for.

Click Customer Service, e-mail office@leapers.com, or call (734)542-1500 to request warranty service and obtain Leapers Return Authorization Number(RA#) before returning the product. Provide the following information when contacting us:

scope model, serial number, invoice showing seller and date of purchase, reason for return, shipping address (no P.O. Box).

Send the product in its original packaging and the above information with RA# to Leapers. A warranty processing fee will be required. The warranty request will be processed within 1 week upon receipt.

TS Platform

True strength scope platform using smart spherical structure(SSS) to achieve simplified and strengthened inner/outer tube interaction for most precise and responsive W/E adjustment and toughest recoil resistance.

Lever Lock [Patent Pending]

Designed for quick application and removal and to fit on any Picatinny rail system.