UTG PRO 34mm/2PCs High Profile P.O.I Picatinny Rings

SKU
RWU013420
Made in USA
UTG PRO 34mm/2PCs High Profile P.O.I Picatinny Rings
$64.97
In stock

• Proudly Designed and Made in USA
• High Profile P.O.I® (Precision Optics Interface) Rings Have a 37mm Center Height to Fit Optics with a 34mm Tube, and up to a 73mm Outer Objective
• The Innovative P.O.I® (Precision Optics Interface) Addresses 3 of the Most Critical Areas in Scope Rings -
a) Progressively Machined for a Precise Inner Ring Surface to Achieve a Seamless Ring-to-Scope Interaction
b) Low Profile and Flush-fitting Locking Side Plate Controlled by Dual Spring Loaded Guide Rods Interfacing with the Rail with Torx Screw Locking to Ensure Secure and Repeatable Zero Hold
c) Square-shaped Integral Recoil Stop Interfacing with a Picatinny Slot via Complete Surface Contact to Eliminate the Possibility of Forward and Aft Movement from Recoil Vibrations
• 2 Piece Ring Set, Each Equipped with 4 Top Torx Screws Designed with a 22mm Ring Width
• Designed to Fit on Mil-spec 1913 Picatinny Rail Platforms
• Machined from 6061-T6 Aluminum Alloy and 4605 Steel with Matte Black Hard Coat Anodize
• UTG PRO® Original Snag-free Contoured Profile with Reduced Weight and Size

NOTE: We recommend to tighten the ring top screws with a torque value of about 25 inch-lb and the side plate screw with torque value of about 45 inch-lb.

WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

More Information
Saddle Height (in)0.79
Saddle Height (mm)20
Inner Diameter (in)1.34
Inner Diameter (mm)34mm
Made in USAYes
No. of Pieces2
922R CompliantNo
MaterialsAluminum/Steel
Color(s)Black
Surface FinishAnodize
Quick-detachableNo
Parts IncludedT25 Torx Wrench
WarrantyLifetime
Height ProfileMedium
Inner Diameter34 mm
Dimensions
Inner Diameter (in)1.34
Inner Diameter (mm)34mm
Saddle Height (in)0.79
Saddle Height (mm)20

LEAPERS LIFETIME WARRANTY

Leapers, Inc. warrants that all products conform to published specifications and are free from defects in material and workmanship. Leapers, Inc. will repair or replace, at our discretion, a defective product for the duration of the product’s lifespan. Verification through an RA number is required. In the event of a product being discontinued, credit in the amount of the product’s MSRP may be offered.


WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.